Our four cylinder lift is shipped assembled & factory tested.
Just put in place & plug it in!
Our four cylinder lift can be easily relocated to other locations.
No need to disassemble. Move it anywhere.
Our four cylinder lift has enough structural integrity to stand-alone.
Does not need to be bolted to the floor.
Our four cylinder lift uses four (4) individual cylinders to lift.
All hydraulic power = lower maintenance cost.
Our four cylinder lift does not use chains, cables or pulleys.
Lift-A-Lift® models: V-(20,30,40)-A, have
push button hydraulic width adjustment.
Models V-25AF(8,10,12), have 22" wide
runways (there is no need to adjust the width).
Standard approach ramp accommodates vehicles
with low under clearance.
Our four cylinder lift has removable runway panels.
Our four cylinder lift has both automatic hydraulic & mechanical
safety locks that work whenever the lift is
used.
|
Single cylinder lifts are shipped in parts & pieces and must be
assembled in the field.
To move single cylinder lifts, you must disassemble to
move & reassemble in new location
Single cylinder lifts require four (4) anchor bolts at each post.
It uses the strength of the concrete to support
the legs.
Single cylinder lifts use a single (1) cylinder & leaf chain
to provide lift to all four (4) posts.
Single cylinder lifts use a leaf chain that can stretch.
Single cylinder lift's width adjustment is cumbersome & must
be made manually with either a team of men
or a forklift from the side. One runway weighs
approx. 1000#.
Single cylinder lift's steep ramp are not compatible with vehicles with
low under clearance.
Single cylinder lifts do not have removable runway panels.
Single cylinder lifts have mechanical safety locks in each of the
four posts. Not automatic safety locks.
All Four-post Lifts are NOT Created Equal!
|
